271 Beardy St, Armidale(02) 6772 4627

Trims - PVC, Aluminium, Stainless Steel & Brass

Armidale Ceramics carry a comprehensive range of tiling angles, coving, expansion joint and transitions. These trims are available in PVC, Aluminium, Brass, Stainless Steel and Powder Coated finishes.

Armidale Ceramics can supply angles from 8mm through to 50mm in height in plain and punched format. Angle suitable for thin bed adhered to sand / cement bedded floors and also useful for most waterproofing applications. Half round trim in PVC, Aluminium, Stainless Steel and Brass to give that professional finish to the raw edges of both wall and floor tiles from 6mm through to 12mm high. Aluminium milled and powder coated coving sections are available as either "glue in" or "glue on" profiles, in a variety of shoulder heights and radii. Expansion Joint is again available in PVC, Aluminium and Brass in a variety of heights and widths with a selection of neoprene colours to cover most applications. Ramped transitions also can be found in Aluminium and Brass, used to create a smooth change from timber, vinyl and cork flooring to ceramic tiles.

Finish your wall and floor tiling project with quality trims from Armidale Ceramics.

Contact Us

Contact Us